The first step is to cut the pieces to a uniform(ish) form. (Be sure that you have removed any nails from the recycled boards prior to use!)
I used a handsaw to cut the edges of each piece into a simple 45-degree angle that was made by way of a straight line that was measured with a ruler. You could use a circular saw but I did not have one to utilize.
The lumber I had acquired was Eastern White Pine (Pinus strobus) which is a softwood that is easy to work with and cut through. The downside is that it can dent easily, but I find that dents provide character to the finished project.
Once the angles are cut, you can sand the edges slightly. You do not have to do this process, as it is optional, but it does give your final project a cleaner look.
I chose the length of each of the pieces to be 17″. That’s an uneven number but the length provided enough lumber to create a frame out of a single board. You can decide on the length of your pieces as the process of pre-drilling and assembly are exactly the same.
To prepare the pieces for assembly, measure the thickness of the boards you just cut. You want to figure out how many screws you will need to assemble the boards together. Two screws will usually be suitable for anything between 4-6 inches wide.
No comments:
Post a Comment